Blog #3

I had a lot of fun last lesson. I had already bent my lamp to the shape I wanted, so the next thing to do was to drill it to my base. I stuck with the normal rectangle base then the triangle base. I first needed to mark on the lamp where I wanted the base to be attached and drill two holes there with the big drill. Then I needed to place the lamp structure where I wanted it to be on the base and used a small drill to drill there the holes were going to be. After that, I needed to get two Phillips head screws and hand turn them into the holes. Once I can't screw them in by hand anymore, I eventually used an electric screw driver attaching the metal lamp structure to the base. This was a lot of fun to do. After I just check to see if the screws are in properly I think I'll be able to start on the lighting!